Knowledge

In our life, many things are also built with aluminum materials, for example, aluminum circles discs; this is an automated production line designed and manufactured for aluminum cookers, aluminum discs manufacturers and suppliers. What are the characteristics of the production technology for producing aluminum wafers?

There are six main points about aluminum circles discs process flows:

1.The CNC is fully automatic.The production line should start from the unwinding of the coil until the entire roll of material is blanked.It does not require manual contact with any materials and adjustments.It basically eliminates the production safety hazards caused by ordinary punches and Hidden product quality.

2. The line can directly use the coil to produce wafers without the need for slitting and cross-cutting of the coil, which reduces the production process, reduces the cost of production, and reduces the possibility of damaging the surface of the coil.

3.The line makes full use of the width of the roll material and is controlled by a high-precision servo motor drive system, which minimizes the wafer spacing and the distance from the wafer to the material edge, radically reduces the amount of waste, and makes the raw material utilization rate reach 80%. the above.

4. The production speed can reach 20-60 tablets per minute, which improves the production efficiency.

5. Due to the use of a modular mold design, when converting wafer production specifications, the conversion time can be reduced to less than 15 minutes. The diameter of wafers that can be produced ranges from 85mm to 700mm.

6. Advanced unwinding system, six-level leveling machine, high rigid mechanical press, automatic palletizing system, etc., ensure the high quality of wafer products.

Q How are aluminum circles discs produced?

Question: My client wants to produce aluminum wafers for cooking utensils ~ `thickness is 0.7mm 0.8mm 1.6mm ...

Answer: Use punches ~～ Professional points, for example: 1. Mechanical presses / crank presses: open tilting presses, open fixed presses, closed single / double / four-point presses, etc. 2. Four-column hydraulic (oil) press. You said that the pieces are not large or small, it is estimated that a press of about 315T (estimated value, not necessarily accurate): closed double / single point press, hydraulic press. As for ...

Q Which aluminum circles discs Henan Henry produce?

A: The main products of Henan Henry are: kitchen aluminum circles, lamps aluminum wafers, can aluminum discs, liquid nitrogen can aluminum disks, medicine can aluminum wafers, etc. According to the customer's different post-processing technology, 1 series and 3 series aluminum circles are mainly introduced. Other series, such as 4 series, 6 series, and 8 series, can be discussed in detail with Henan Henry.

Q Which company does aluminum circles discs professionally and quickly?

Answer: Henan henry currently has 3 automated production lines, of which 2 have a nominal pressure of 800KN and 1 has a nominal pressure of 1600KN. The equipment uses a pneumatic punching machine, and the number of blanking times per minute is 40-60 times. The monthly production capacity of 800KN production line can reach 300 tons, and the production capacity of 1600KN production line can reach 600 tons.