Knowledge

The traditional red wine is a oak plug, so lay the red wine on the flat, let the liquor fully contact the bottle in the bottle, so it won't break into the air because the plug is dry. However, it has strict requirements for storage conditions and high requirements for temperature and humidity. If it is not properly controlled, it will cause the mold pollution to result in the deterioration of the wine. The incidence of this mold is as high as 1%. So many red wine now take the metal plug unscrewed, so it is very good to stop the possibility of air entry, and will not cause leakage because of the temperature and other reasons, so the metal plug is also more and more widely used.

These wrought metal plugs are mostly made of an aluminum alloy  8011.  this 8011 aluminum closure sheet has a good deep drawing effect, the maximum punching depth can reach 60-80mm, can be directly stamped forming; at the same time, 8011 aluminum alloy has excellent oxidation effect. After oxidation coloring, the color is bright and beautiful, and the quality is lighter, and the horse iron. The specific gravity can reach 1/10, which has the advantages of high recycling rate and environmental protection. Therefore, it has been accepted by more manufacturers and customers.

Henan Henry can mufacture Aluminum Closure Sheet 8011-DC / CC 0.21mm- 0.25mm Thickness, 8011 Alloy Aluminum Alloy Sheet H14 H16 Temper Anodized Aluminum Sheet, Various Colors Aluminum Cladding Sheet 8011 Polished Aluminum Sheet For ROPP Caps, Hydrophic Coating Copper Tube Aluminum Fin Coil Temper O Aluminum Evaporator Coil, High Strength Hydrophilic Aluminum Foil 1100 8011 Alloy For Fin Stock, Light Weight Soft Aluminum Foil , Air Conditioner Aluminum Condenser Coil, Aluminum Fin Foil Air Conditioner Cooling Hydrophilic Aluminum Foil ISO9001, 0.10mm X 18mm Aluminum Foil Strip 4343 / 3003 / 4343 Alloy For Brazed Radiator, Industrial Extra Heavy Duty Aluminum Foil Car Radiator With 7072 / 3003 / 4343 Alloy, Aluminum Foil Strip Commercial Aluminum Foil Roll For Heat Transport,  Commercial Aluminum Foil 3003 1.5%Zn Zr Aluminum Blister Foil, 8011 / H14 Lacquer Coated Aluminum Foil 0.17mm x 94mm For Medical Bottle Caps, Temper H14 Plastic Coated Aluminum Foil Dual Sides Clear Without Lacquer, Dual Sides Clear Lacquer Coated Aluminum Foil 8011 H34 For Aluminum Vial Seals, Dual Sides Clear Heat Seal Lacquer Aluminum Foil With 8011 Alloy H14 Temper, Alloy 8011 Aluminum Alloy Closure Sheet H14 / H18 0.18mm - 0.25mm Deep Drawing For PP Cap, Temper H14 Aluminum Alloy Sheet 8011 Alloy PP Caps Thick Aluminum Foil Sheet, 0.21mm Plain Aluminum Sheet 8011 Temper H14 For Pilfer Proof Caps.