Knowledge

Aluminum Tread Plate, also known as embossed aluminum sheet, is an aluminum alloy sheet on which the surface of the aluminum sheet is pressed to form a raised or recessed pattern. According to the alloy series, it can be divided into 1 series, 3 series, 5 series, 6 series, etc. Among them, 3003 pattern aluminum plate is one of the extensive alloys in the 3 series embossed plate products, and is also a common representative of Aluminum Tread Plate.

The superior performance of Mingtai 3003 Aluminum Tread Plate

3003 Aluminum Tread Plate is a 3 series aluminum-manganese alloy and is a widely used rust-proof aluminum alloy. The strength of 3003 alloy is not high, it can not be heat-treated and strengthened. Generally, the cold working method is used to improve the mechanical properties. In the annealed state, it has high plasticity and good corrosion resistance. The ordinary 3003 aluminum plate is generally used to make low in liquid or gaseous medium. Load parts, 3003 Aluminum Tread Plate is used for anti-slip, generally used in ramps, stairs, non-slip floors, decorative panels and other fields.

According to the shape of the pattern, Mingtai Aluminum's 3003 Aluminum Tread Plate can be divided into one rib, three ribs and five ribs. After the product is oxidized, the surface of the aluminum plate is whitish, which is particularly beautiful and has a uniform flower pattern, which is a common decorative anti-slip product.

3003 Aluminum Tread Plate Specifications

The production advantages of Aluminum 3003 Aluminum Tread Plate are obvious. After years of technical research and development, the company has built two online quenching lines, which have accelerated the production speed and greatly shortened the production cycle. The company can process the range: 850mm≤width≤1650mm, 1.2mm≤thickness≤10mm, 600mm ≤ sheet length ≤ 6500mm. The variety of products is effective and caters to the needs of the market.

How to choose the quality Aluminum Tread Plate?

a, select the Aluminum Tread Plate first to see the thickness. The thickness, strength and oxide film thickness of the high-quality aluminum plate should conform to the national standards: aluminum plate thickness ≥1.2mm, tensile strength ≥157 N/mm 2 , yield strength ≥108 N/mm 2 , oxide film thickness ≥10 μm.

b. Select the pattern of aluminum plate and look at the processing. The pattern aluminum plate should be bright, the pattern is clear, the aluminum plate is flat, no pollution, scratches, etc.

c, Aluminum Tread Plate, from production to delivery, need packaging, finishing, labeling, transportation, logistics and many other environments, so high-quality aluminum plate manufacturers should provide one-stop service system for customers from production to after-sales, comprehensive Protect the interests of customers.