English
عربي 
Español
Pharmaceutical Aluminum Foil for blister packs are used mostly in the pharmaceutical industry to package tablets and capsules in a manner that they remain protected from ambient contamination. These are hard PTP pharmaceutical aluminum foils where one side is coated with heat seal lacquer and the other side is unprinted or printed to facilitate pharmaceutical blister packaging.
Pharmaceutical Aluminum Foil for blister packs, also known as blister foil or medicine foil, are used widely in the pharmaceutical industry to wrap tablets and capsules in a way that they remain protected from contamination. These are hard PTP pharmaceutical aluminum foil where one side is coated with heat seal lacquer and the other side is plain or printed to facilitate pharmaceutical blister packaging. Our pharmaceutical aluminum foil thicknesses used in pharmaceutical blister packaging are 20 micron, 25 micron hard temper and 30 micron soft temper. From rolling to ready material storing, our factory meets the highest hygiene standards guaranteeing that the final packaging will fulfil the desired specifications. With the use of our advanced pinhole detectors we control the entire length of the foil ensuring that our product achieves maximum. Especially for blister foil, our experience and our extensive technological staffs enable us to offer a product surface suitable for water based primers.
Specification
Alloy | 1235, 8011 |
Temper | O, H18 |
Thickness | 0.007~0.04mm |
Tolerance +/-4% | |
Width | 100~1220mm |
Tolerance +/- 1.0 Mm | |
Coil ID | 75, 150 |
Wetability | 33 Dyne Min. |
Chemical Compositions
Alloy | Fe | Si | Cu | Mn | Mg | Cr | Zn | Ni | Ti | Other | Al | |
Each | Total | |||||||||||
1235 | 0.65 | 0.05 | 0.05 | 0.05 | - | 0.1 | - | 0.06 | 0.05 | 0.15 | 99.35 | |
8011 | 0.6~1.0 | 0.50~0.9 | 0.1 | 0.2 | 0.05 | 0.05 | 0.1 | - | 0.08 | 0.05 | 0.15 | Remains |
Mechanical Properties
Alloy | Temper | Tensile Strength | Elongation |
8011 | H18 | >175 MPa | >2.5% |
1235 | H18 | >150 MPa | >2.5% |
8011 | O | >85 MPa | >3.5% |
Features
1. Light weight
2. Hygienic, non-toxic
3. Excellent barrier property
4. Protect from light, ultraviolet radiation, oils and grease, water vapour, oxygen and microorganisms.
Applications
1. Blister packs
2. Strip packs
3. Sachets and pouches
4. Heat sealed membranes and closures
5. Collapsible tubes.
FAQ
1. Are you a manufacturer?
Yes, we are plain aluminum foil and laminated aluminium foil material manufacturer and we have our own factory since 2009.
2. What’s your product range?
Foils: Aluminium foil container, Tobacco foil, Cable Aluminum Foil, Air conditioner Foil, Aluminium foil tape, Electronic Foil ,Industrial Foil, Pharmaceutical aluminium foil , Blister foil, Art&Decoration Foil, Aluminum Foil Container and other composite products
3. What is your MOQ?
Normally our MOQ is 3 tons for pure and laminated aluminum foil. But we could also make the products for you if your quantity doesn’t reach our MOQ. As for we have our minimum volume of business per order.
Therefore as long as you pay us the minimum volume of business, even if your quantity less than 3 tons, we could also make the bags for you according to your demand.
4. Do you have stock products to sell?
Yes. Actually we have many kinds of aluminium foil for stock selling.
5. What’s the information should I let you know if I want to get a full quotation?
√ Alloy
√ Temper
√ Thickness
√ Width
√ I.D and O.D
√ Application
√ Quantity
6. How do you ship the products?
√ By sea
√ By air
√ By railway:(to Europe and Middle Asia)
QR Code
